How to Start With Bitcoin at No Cost Featured Bitcoin News

Dragonchain Great Reddit Scaling Bake-Off Public Proposal

Dragonchain Great Reddit Scaling Bake-Off Public Proposal

Dragonchain Public Proposal TL;DR:

Dragonchain has demonstrated twice Reddit’s entire total daily volume (votes, comments, and posts per Reddit 2019 Year in Review) in a 24-hour demo on an operational network. Every single transaction on Dragonchain is decentralized immediately through 5 levels of Dragon Net, and then secured with combined proof on Bitcoin, Ethereum, Ethereum Classic, and Binance Chain, via Interchain. At the time, in January 2020, the entire cost of the demo was approximately $25K on a single system (transaction fees locked at $0.0001/txn). With current fees (lowest fee $0.0000025/txn), this would cost as little as $625.
Watch Joe walk through the entire proposal and answer questions on YouTube.
This proposal is also available on the Dragonchain blog.

Hello Reddit and Ethereum community!

I’m Joe Roets, Founder & CEO of Dragonchain. When the team and I first heard about The Great Reddit Scaling Bake-Off we were intrigued. We believe we have the solutions Reddit seeks for its community points system and we have them at scale.
For your consideration, we have submitted our proposal below. The team at Dragonchain and I welcome and look forward to your technical questions, philosophical feedback, and fair criticism, to build a scaling solution for Reddit that will empower its users. Because our architecture is unlike other blockchain platforms out there today, we expect to receive many questions while people try to grasp our project. I will answer all questions here in this thread on Reddit, and I've answered some questions in the stream on YouTube.
We have seen good discussions so far in the competition. We hope that Reddit’s scaling solution will emerge from The Great Reddit Scaling Bake-Off and that Reddit will have great success with the implementation.

Executive summary

Dragonchain is a robust open source hybrid blockchain platform that has proven to withstand the passing of time since our inception in 2014. We have continued to evolve to harness the scalability of private nodes, yet take full advantage of the security of public decentralized networks, like Ethereum. We have a live, operational, and fully functional Interchain network integrating Bitcoin, Ethereum, Ethereum Classic, and ~700 independent Dragonchain nodes. Every transaction is secured to Ethereum, Bitcoin, and Ethereum Classic. Transactions are immediately usable on chain, and the first decentralization is seen within 20 seconds on Dragon Net. Security increases further to public networks ETH, BTC, and ETC within 10 minutes to 2 hours. Smart contracts can be written in any executable language, offering full freedom to existing developers. We invite any developer to watch the demo, play with our SDK’s, review open source code, and to help us move forward. Dragonchain specializes in scalable loyalty & rewards solutions and has built a decentralized social network on chain, with very affordable transaction costs. This experience can be combined with the insights Reddit and the Ethereum community have gained in the past couple of months to roll out the solution at a rapid pace.

Response and PoC

In The Great Reddit Scaling Bake-Off post, Reddit has asked for a series of demonstrations, requirements, and other considerations. In this section, we will attempt to answer all of these requests.

Live Demo

A live proof of concept showing hundreds of thousands of transactions
On Jan 7, 2020, Dragonchain hosted a 24-hour live demonstration during which a quarter of a billion (250 million+) transactions executed fully on an operational network. Every single transaction on Dragonchain is decentralized immediately through 5 levels of Dragon Net, and then secured with combined proof on Bitcoin, Ethereum, Ethereum Classic, and Binance Chain, via Interchain. This means that every single transaction is secured by, and traceable to these networks. An attack on this system would require a simultaneous attack on all of the Interchained networks.
24 hours in 4 minutes (YouTube):
24 hours in 4 minutes
The demonstration was of a single business system, and any user is able to scale this further, by running multiple systems simultaneously. Our goals for the event were to demonstrate a consistent capacity greater than that of Visa over an extended time period.
Tooling to reproduce our demo is available here:
https://github.com/dragonchain/spirit-bomb

Source Code

Source code (for on & off-chain components as well tooling used for the PoC). The source code does not have to be shared publicly, but if Reddit decides to use a particular solution it will need to be shared with Reddit at some point.

Scaling

How it works & scales

Architectural Scaling

Dragonchain’s architecture attacks the scalability issue from multiple angles. Dragonchain is a hybrid blockchain platform, wherein every transaction is protected on a business node to the requirements of that business or purpose. A business node may be held completely private or may be exposed or replicated to any level of exposure desired.
Every node has its own blockchain and is independently scalable. Dragonchain established Context Based Verification as its consensus model. Every transaction is immediately usable on a trust basis, and in time is provable to an increasing level of decentralized consensus. A transaction will have a level of decentralization to independently owned and deployed Dragonchain nodes (~700 nodes) within seconds, and full decentralization to BTC and ETH within minutes or hours. Level 5 nodes (Interchain nodes) function to secure all transactions to public or otherwise external chains such as Bitcoin and Ethereum. These nodes scale the system by aggregating multiple blocks into a single Interchain transaction on a cadence. This timing is configurable based upon average fees for each respective chain. For detailed information about Dragonchain’s architecture, and Context Based Verification, please refer to the Dragonchain Architecture Document.

Economic Scaling

An interesting feature of Dragonchain’s network consensus is its economics and scarcity model. Since Dragon Net nodes (L2-L4) are independent staking nodes, deployment to cloud platforms would allow any of these nodes to scale to take on a large percentage of the verification work. This is great for scalability, but not good for the economy, because there is no scarcity, and pricing would develop a downward spiral and result in fewer verification nodes. For this reason, Dragonchain uses TIME as scarcity.
TIME is calculated as the number of Dragons held, multiplied by the number of days held. TIME influences the user’s access to features within the Dragonchain ecosystem. It takes into account both the Dragon balance and length of time each Dragon is held. TIME is staked by users against every verification node and dictates how much of the transaction fees are awarded to each participating node for every block.
TIME also dictates the transaction fee itself for the business node. TIME is staked against a business node to set a deterministic transaction fee level (see transaction fee table below in Cost section). This is very interesting in a discussion about scaling because it guarantees independence for business implementation. No matter how much traffic appears on the entire network, a business is guaranteed to not see an increased transaction fee rate.

Scaled Deployment

Dragonchain uses Docker and Kubernetes to allow the use of best practices traditional system scaling. Dragonchain offers managed nodes with an easy to use web based console interface. The user may also deploy a Dragonchain node within their own datacenter or favorite cloud platform. Users have deployed Dragonchain nodes on-prem on Amazon AWS, Google Cloud, MS Azure, and other hosting platforms around the world. Any executable code, anything you can write, can be written into a smart contract. This flexibility is what allows us to say that developers with no blockchain experience can use any code language to access the benefits of blockchain. Customers have used NodeJS, Python, Java, and even BASH shell script to write smart contracts on Dragonchain.
With Docker containers, we achieve better separation of concerns, faster deployment, higher reliability, and lower response times.
We chose Kubernetes for its self-healing features, ability to run multiple services on one server, and its large and thriving development community. It is resilient, scalable, and automated. OpenFaaS allows us to package smart contracts as Docker images for easy deployment.
Contract deployment time is now bounded only by the size of the Docker image being deployed but remains fast even for reasonably large images. We also take advantage of Docker’s flexibility and its ability to support any language that can run on x86 architecture. Any image, public or private, can be run as a smart contract using Dragonchain.

Flexibility in Scaling

Dragonchain’s architecture considers interoperability and integration as key features. From inception, we had a goal to increase adoption via integration with real business use cases and traditional systems.
We envision the ability for Reddit, in the future, to be able to integrate alternate content storage platforms or other financial services along with the token.
  • LBRY - To allow users to deploy content natively to LBRY
  • MakerDAO to allow users to lend small amounts backed by their Reddit community points.
  • STORJ/SIA to allow decentralized on chain storage of portions of content. These integrations or any other are relatively easy to integrate on Dragonchain with an Interchain implementation.

Cost

Cost estimates (on-chain and off-chain) For the purpose of this proposal, we assume that all transactions are on chain (posts, replies, and votes).
On the Dragonchain network, transaction costs are deterministic/predictable. By staking TIME on the business node (as described above) Reddit can reduce transaction costs to as low as $0.0000025 per transaction.
Dragonchain Fees Table

Getting Started

How to run it
Building on Dragonchain is simple and requires no blockchain experience. Spin up a business node (L1) in our managed environment (AWS), run it in your own cloud environment, or on-prem in your own datacenter. Clear documentation will walk you through the steps of spinning up your first Dragonchain Level 1 Business node.
Getting started is easy...
  1. Download Dragonchain’s dctl
  2. Input three commands into a terminal
  3. Build an image
  4. Run it
More information can be found in our Get started documents.

Architecture
Dragonchain is an open source hybrid platform. Through Dragon Net, each chain combines the power of a public blockchain (like Ethereum) with the privacy of a private blockchain.
Dragonchain organizes its network into five separate levels. A Level 1, or business node, is a totally private blockchain only accessible through the use of public/private keypairs. All business logic, including smart contracts, can be executed on this node directly and added to the chain.
After creating a block, the Level 1 business node broadcasts a version stripped of sensitive private data to Dragon Net. Three Level 2 Validating nodes validate the transaction based on guidelines determined from the business. A Level 3 Diversity node checks that the level 2 nodes are from a diverse array of locations. A Level 4 Notary node, hosted by a KYC partner, then signs the validation record received from the Level 3 node. The transaction hash is ledgered to the Level 5 public chain to take advantage of the hash power of massive public networks.
Dragon Net can be thought of as a “blockchain of blockchains”, where every level is a complete private blockchain. Because an L1 can send to multiple nodes on a single level, proof of existence is distributed among many places in the network. Eventually, proof of existence reaches level 5 and is published on a public network.

API Documentation

APIs (on chain & off)

SDK Source

Nobody’s Perfect

Known issues or tradeoffs
  • Dragonchain is open source and even though the platform is easy enough for developers to code in any language they are comfortable with, we do not have so large a developer community as Ethereum. We would like to see the Ethereum developer community (and any other communities) become familiar with our SDK’s, our solutions, and our platform, to unlock the full potential of our Ethereum Interchain. Long ago we decided to prioritize both Bitcoin and Ethereum Interchains. We envision an ecosystem that encompasses different projects to give developers the ability to take full advantage of all the opportunities blockchain offers to create decentralized solutions not only for Reddit but for all of our current platforms and systems. We believe that together we will take the adoption of blockchain further. We currently have additional Interchain with Ethereum Classic. We look forward to Interchain with other blockchains in the future. We invite all blockchains projects who believe in decentralization and security to Interchain with Dragonchain.
  • While we only have 700 nodes compared to 8,000 Ethereum and 10,000 Bitcoin nodes. We harness those 18,000 nodes to scale to extremely high levels of security. See Dragonchain metrics.
  • Some may consider the centralization of Dragonchain’s business nodes as an issue at first glance, however, the model is by design to protect business data. We do not consider this a drawback as these nodes can make any, none, or all data public. Depending upon the implementation, every subreddit could have control of its own business node, for potential business and enterprise offerings, bringing new alternative revenue streams to Reddit.

Costs and resources

Summary of cost & resource information for both on-chain & off-chain components used in the PoC, as well as cost & resource estimates for further scaling. If your PoC is not on mainnet, make note of any mainnet caveats (such as congestion issues).
Every transaction on the PoC system had a transaction fee of $0.0001 (one-hundredth of a cent USD). At 256MM transactions, the demo cost $25,600. With current operational fees, the same demonstration would cost $640 USD.
For the demonstration, to achieve throughput to mimic a worldwide payments network, we modeled several clients in AWS and 4-5 business nodes to handle the traffic. The business nodes were tuned to handle higher throughput by adjusting memory and machine footprint on AWS. This flexibility is valuable to implementing a system such as envisioned by Reddit. Given that Reddit’s daily traffic (posts, replies, and votes) is less than half that of our demo, we would expect that the entire Reddit system could be handled on 2-5 business nodes using right-sized containers on AWS or similar environments.
Verification was accomplished on the operational Dragon Net network with over 700 independently owned verification nodes running around the world at no cost to the business other than paid transaction fees.

Requirements

Scaling

This PoC should scale to the numbers below with minimal costs (both on & off-chain). There should also be a clear path to supporting hundreds of millions of users.
Over a 5 day period, your scaling PoC should be able to handle:
*100,000 point claims (minting & distributing points) *25,000 subscriptions *75,000 one-off points burning *100,000 transfers
During Dragonchain’s 24 hour demo, the above required numbers were reached within the first few minutes.
Reddit’s total activity is 9000% more than Ethereum’s total transaction level. Even if you do not include votes, it is still 700% more than Ethereum’s current volume. Dragonchain has demonstrated that it can handle 250 million transactions a day, and it’s architecture allows for multiple systems to work at that level simultaneously. In our PoC, we demonstrate double the full capacity of Reddit, and every transaction was proven all the way to Bitcoin and Ethereum.
Reddit Scaling on Ethereum

Decentralization

Solutions should not depend on any single third-party provider. We prefer solutions that do not depend on specific entities such as Reddit or another provider, and solutions with no single point of control or failure in off-chain components but recognize there are numerous trade-offs to consider
Dragonchain’s architecture calls for a hybrid approach. Private business nodes hold the sensitive data while the validation and verification of transactions for the business are decentralized within seconds and secured to public blockchains within 10 minutes to 2 hours. Nodes could potentially be controlled by owners of individual subreddits for more organic decentralization.
  • Billing is currently centralized - there is a path to federation and decentralization of a scaled billing solution.
  • Operational multi-cloud
  • Operational on-premises capabilities
  • Operational deployment to any datacenter
  • Over 700 independent Community Verification Nodes with proof of ownership
  • Operational Interchain (Interoperable to Bitcoin, Ethereum, and Ethereum Classic, open to more)

Usability Scaling solutions should have a simple end user experience.

Users shouldn't have to maintain any extra state/proofs, regularly monitor activity, keep track of extra keys, or sign anything other than their normal transactions
Dragonchain and its customers have demonstrated extraordinary usability as a feature in many applications, where users do not need to know that the system is backed by a live blockchain. Lyceum is one of these examples, where the progress of academy courses is being tracked, and successful completion of courses is rewarded with certificates on chain. Our @Save_The_Tweet bot is popular on Twitter. When used with one of the following hashtags - #please, #blockchain, #ThankYou, or #eternalize the tweet is saved through Eternal to multiple blockchains. A proof report is available for future reference. Other examples in use are DEN, our decentralized social media platform, and our console, where users can track their node rewards, view their TIME, and operate a business node.
Examples:

Transactions complete in a reasonable amount of time (seconds or minutes, not hours or days)
All transactions are immediately usable on chain by the system. A transaction begins the path to decentralization at the conclusion of a 5-second block when it gets distributed across 5 separate community run nodes. Full decentralization occurs within 10 minutes to 2 hours depending on which interchain (Bitcoin, Ethereum, or Ethereum Classic) the transaction hits first. Within approximately 2 hours, the combined hash power of all interchained blockchains secures the transaction.

Free to use for end users (no gas fees, or fixed/minimal fees that Reddit can pay on their behalf)
With transaction pricing as low as $0.0000025 per transaction, it may be considered reasonable for Reddit to cover transaction fees for users.
All of Reddit's Transactions on Blockchain (month)
Community points can be earned by users and distributed directly to their Reddit account in batch (as per Reddit minting plan), and allow users to withdraw rewards to their Ethereum wallet whenever they wish. Withdrawal fees can be paid by either user or Reddit. This model has been operating inside the Dragonchain system since 2018, and many security and financial compliance features can be optionally added. We feel that this capability greatly enhances user experience because it is seamless to a regular user without cryptocurrency experience, yet flexible to a tech savvy user. With regard to currency or token transactions, these would occur on the Reddit network, verified to BTC and ETH. These transactions would incur the $0.0000025 transaction fee. To estimate this fee we use the monthly active Reddit users statista with a 60% adoption rate and an estimated 10 transactions per month average resulting in an approximate $720 cost across the system. Reddit could feasibly incur all associated internal network charges (mining/minting, transfer, burn) as these are very low and controllable fees.
Reddit Internal Token Transaction Fees

Reddit Ethereum Token Transaction Fees
When we consider further the Ethereum fees that might be incurred, we have a few choices for a solution.
  1. Offload all Ethereum transaction fees (user withdrawals) to interested users as they wish to withdraw tokens for external use or sale.
  2. Cover Ethereum transaction fees by aggregating them on a timed schedule. Users would request withdrawal (from Reddit or individual subreddits), and they would be transacted on the Ethereum network every hour (or some other schedule).
  3. In a combination of the above, customers could cover aggregated fees.
  4. Integrate with alternate Ethereum roll up solutions or other proposals to aggregate minting and distribution transactions onto Ethereum.

Bonus Points

Users should be able to view their balances & transactions via a blockchain explorer-style interface
From interfaces for users who have no knowledge of blockchain technology to users who are well versed in blockchain terms such as those present in a typical block explorer, a system powered by Dragonchain has flexibility on how to provide balances and transaction data to users. Transactions can be made viewable in an Eternal Proof Report, which displays raw data along with TIME staking information and traceability all the way to Bitcoin, Ethereum, and every other Interchained network. The report shows fields such as transaction ID, timestamp, block ID, multiple verifications, and Interchain proof. See example here.
Node payouts within the Dragonchain console are listed in chronological order and can be further seen in either Dragons or USD. See example here.
In our social media platform, Dragon Den, users can see, in real-time, their NRG and MTR balances. See example here.
A new influencer app powered by Dragonchain, Raiinmaker, breaks down data into a user friendly interface that shows coin portfolio, redeemed rewards, and social scores per campaign. See example here.

Exiting is fast & simple
Withdrawing funds on Dragonchain’s console requires three clicks, however, withdrawal scenarios with more enhanced security features per Reddit’s discretion are obtainable.

Interoperability Compatibility with third party apps (wallets/contracts/etc) is necessary.
Proven interoperability at scale that surpasses the required specifications. Our entire platform consists of interoperable blockchains connected to each other and traditional systems. APIs are well documented. Third party permissions are possible with a simple smart contract without the end user being aware. No need to learn any specialized proprietary language. Any code base (not subsets) is usable within a Docker container. Interoperable with any blockchain or traditional APIs. We’ve witnessed relatively complex systems built by engineers with no blockchain or cryptocurrency experience. We’ve also demonstrated the creation of smart contracts within minutes built with BASH shell and Node.js. Please see our source code and API documentation.

Scaling solutions should be extensible and allow third parties to build on top of it Open source and extensible
APIs should be well documented and stable

Documentation should be clear and complete
For full documentation, explore our docs, SDK’s, Github repo’s, architecture documents, original Disney documentation, and other links or resources provided in this proposal.

Third-party permissionless integrations should be possible & straightforward Smart contracts are Docker based, can be written in any language, use full language (not subsets), and can therefore be integrated with any system including traditional system APIs. Simple is better. Learning an uncommon or proprietary language should not be necessary.
Advanced knowledge of mathematics, cryptography, or L2 scaling should not be required. Compatibility with common utilities & toolchains is expected.
Dragonchain business nodes and smart contracts leverage Docker to allow the use of literally any language or executable code. No proprietary language is necessary. We’ve witnessed relatively complex systems built by engineers with no blockchain or cryptocurrency experience. We’ve also demonstrated the creation of smart contracts within minutes built with BASH shell and Node.js.

Bonus

Bonus Points: Show us how it works. Do you have an idea for a cool new use case for Community Points? Build it!

TIME

Community points could be awarded to Reddit users based upon TIME too, whereas the longer someone is part of a subreddit, the more community points someone naturally gained, even if not actively commenting or sharing new posts. A daily login could be required for these community points to be credited. This grants awards to readers too and incentivizes readers to create an account on Reddit if they browse the website often. This concept could also be leveraged to provide some level of reputation based upon duration and consistency of contribution to a community subreddit.

Dragon Den

Dragonchain has already built a social media platform that harnesses community involvement. Dragon Den is a decentralized community built on the Dragonchain blockchain platform. Dragon Den is Dragonchain’s answer to fake news, trolling, and censorship. It incentivizes the creation and evaluation of quality content within communities. It could be described as being a shareholder of a subreddit or Reddit in its entirety. The more your subreddit is thriving, the more rewarding it will be. Den is currently in a public beta and in active development, though the real token economy is not live yet. There are different tokens for various purposes. Two tokens are Lair Ownership Rights (LOR) and Lair Ownership Tokens (LOT). LOT is a non-fungible token for ownership of a specific Lair. LOT will only be created and converted from LOR.
Energy (NRG) and Matter (MTR) work jointly. Your MTR determines how much NRG you receive in a 24-hour period. Providing quality content, or evaluating content will earn MTR.

Security. Users have full ownership & control of their points.
All community points awarded based upon any type of activity or gift, are secured and provable to all Interchain networks (currently BTC, ETH, ETC). Users are free to spend and withdraw their points as they please, depending on the features Reddit wants to bring into production.

Balances and transactions cannot be forged, manipulated, or blocked by Reddit or anyone else
Users can withdraw their balance to their ERC20 wallet, directly through Reddit. Reddit can cover the fees on their behalf, or the user covers this with a portion of their balance.

Users should own their points and be able to get on-chain ERC20 tokens without permission from anyone else
Through our console users can withdraw their ERC20 rewards. This can be achieved on Reddit too. Here is a walkthrough of our console, though this does not show the quick withdrawal functionality, a user can withdraw at any time. https://www.youtube.com/watch?v=aNlTMxnfVHw

Points should be recoverable to on-chain ERC20 tokens even if all third-parties involved go offline
If necessary, signed transactions from the Reddit system (e.g. Reddit + Subreddit) can be sent to the Ethereum smart contract for minting.

A public, third-party review attesting to the soundness of the design should be available
To our knowledge, at least two large corporations, including a top 3 accounting firm, have conducted positive reviews. These reviews have never been made public, as Dragonchain did not pay or contract for these studies to be released.

Bonus points
Public, third-party implementation review available or in progress
See above

Compatibility with HSMs & hardware wallets
For the purpose of this proposal, all tokenization would be on the Ethereum network using standard token contracts and as such, would be able to leverage all hardware wallet and Ethereum ecosystem services.

Other Considerations

Minting/distributing tokens is not performed by Reddit directly
This operation can be automated by smart contract on Ethereum. Subreddits can if desired have a role to play.

One off point burning, as well as recurring, non-interactive point burning (for subreddit memberships) should be possible and scalable
This is possible and scalable with interaction between Dragonchain Reddit system and Ethereum token contract(s).

Fully open-source solutions are strongly preferred
Dragonchain is fully open source (see section on Disney release after conclusion).

Conclusion

Whether it is today, or in the future, we would like to work together to bring secure flexibility to the highest standards. It is our hope to be considered by Ethereum, Reddit, and other integrative solutions so we may further discuss the possibilities of implementation. In our public demonstration, 256 million transactions were handled in our operational network on chain in 24 hours, for the low cost of $25K, which if run today would cost $625. Dragonchain’s interoperable foundation provides the atmosphere necessary to implement a frictionless community points system. Thank you for your consideration of our proposal. We look forward to working with the community to make something great!

Disney Releases Blockchain Platform as Open Source

The team at Disney created the Disney Private Blockchain Platform. The system was a hybrid interoperable blockchain platform for ledgering and smart contract development geared toward solving problems with blockchain adoption and usability. All objective evaluation would consider the team’s output a success. We released a list of use cases that we explored in some capacity at Disney, and our input on blockchain standardization as part of our participation in the W3C Blockchain Community Group.
https://lists.w3.org/Archives/Public/public-blockchain/2016May/0052.html

Open Source

In 2016, Roets proposed to release the platform as open source to spread the technology outside of Disney, as others within the W3C group were interested in the solutions that had been created inside of Disney.
Following a long process, step by step, the team met requirements for release. Among the requirements, the team had to:
  • Obtain VP support and approval for the release
  • Verify ownership of the software to be released
  • Verify that no proprietary content would be released
  • Convince the organization that there was a value to the open source community
  • Convince the organization that there was a value to Disney
  • Offer the plan for ongoing maintenance of the project outside of Disney
  • Itemize competing projects
  • Verify no conflict of interest
  • Preferred license
  • Change the project name to not use the name Disney, any Disney character, or any other associated IP - proposed Dragonchain - approved
  • Obtain legal approval
  • Approval from corporate, parks, and other business units
  • Approval from multiple Disney patent groups Copyright holder defined by Disney (Disney Connected and Advanced Technologies)
  • Trademark searches conducted for the selected name Dragonchain
  • Obtain IT security approval
  • Manual review of OSS components conducted
  • OWASP Dependency and Vulnerability Check Conducted
  • Obtain technical (software) approval
  • Offer management, process, and financial plans for the maintenance of the project.
  • Meet list of items to be addressed before release
  • Remove all Disney project references and scripts
  • Create a public distribution list for email communications
  • Remove Roets’ direct and internal contact information
  • Create public Slack channel and move from Disney slack channels
  • Create proper labels for issue tracking
  • Rename internal private Github repository
  • Add informative description to Github page
  • Expand README.md with more specific information
  • Add information beyond current “Blockchains are Magic”
  • Add getting started sections and info on cloning/forking the project
  • Add installation details
  • Add uninstall process
  • Add unit, functional, and integration test information
  • Detail how to contribute and get involved
  • Describe the git workflow that the project will use
  • Move to public, non-Disney git repository (Github or Bitbucket)
  • Obtain Disney Open Source Committee approval for release
On top of meeting the above criteria, as part of the process, the maintainer of the project had to receive the codebase on their own personal email and create accounts for maintenance (e.g. Github) with non-Disney accounts. Given the fact that the project spanned multiple business units, Roets was individually responsible for its ongoing maintenance. Because of this, he proposed in the open source application to create a non-profit organization to hold the IP and maintain the project. This was approved by Disney.
The Disney Open Source Committee approved the application known as OSSRELEASE-10, and the code was released on October 2, 2016. Disney decided to not issue a press release.
Original OSSRELASE-10 document

Dragonchain Foundation

The Dragonchain Foundation was created on January 17, 2017. https://den.social/l/Dragonchain/24130078352e485d96d2125082151cf0/dragonchain-and-disney/
submitted by j0j0r0 to ethereum [link] [comments]

Telegram AMA - Summary

Telegram AMA - Summary
https://preview.redd.it/hml53mmh5er41.png?width=568&format=png&auto=webp&s=3f0cd662e1836bcb2ea37793cbbbfd6f8a5e9723
Zhuling Chen
It’s always great to hang out in this group. This group means a lot to the Aelf community. It is the first Aelf community and has been there through all the ups and downs in the world. I would like to start with wishing everyone is staying safe at home during the virus outbreak. It definitely has been a difficult time for all of us, but together we can pull through it.
We understand that the situation is quite striking to all of us. But I really believe that the solution to the virus outbreak is about more global coordination and collaboration.
All of you to be assured, our team in different places are all safe and working from home as normal.
The Aelf team in Beijing were among the early ones experiencing the virus outbreak. As everyone was on the way home for Lunar New Year holiday and then experienced a total city lock-down followed by a 40 days’ work from home policy. It was definitely not easy for them, but our team stayed strong, took necessary precautions and focused on work with the right morale. Mappo has recently published some tips on how to work from home effectively based on our experience. Do check it out. Despite not working in the office since February, we have achieved great progress, including launching Aelf 1.0 preview, which is an important milestone in technical delivery and also the roadmap to mainnet launch (which listed out the essential steps for the community to work together to launch a successful public network)
Let's first talk about Aelf v1.0 preview. It is the cornerstone of the mainnet launch. The product itself has all the features that the public network is needed. The codebase has been reviewed and tested rigorously by the team. And a few highlights of how the network would look like:
  1. The code allows a stable and high throughput blockchain network to operate publicly.
  2. For developers, they will love how flexible the system is to be customized, the number of tools and documentation to help them start developing applications on the network
  3. For the whole community, the system is an ever-evolving one where the voting system is ready in place to conduct network-wide voting on various topics, such as transaction fee adjustment, network protocol upgrade, incentive adjustment, etc
  4. Aelf system is able to run multi-chain architecture where each side chain will host different applications and still ready to work with each other
So you may ask since the software is ready, why have we not yet launched the public network? The answer, in short, is that a public blockchain is launched not by a team but through a community effort and that's why we are coordinating the community effort based on the roadmap we proposed. Aelf team has launched the public testnet based on Aelf v1.0 preview and currently, all nodes are under the team. The goal is to let the community and elected nodes to take it over and launch it on a global scale. Not only launch it but also be familiar with the network and also set the launch parameters in a decentralized way. If we take a car as an example, we have made the car, but ultimately the drivers are you guys and therefore before it really hits on the road, we need to guide the community to do a test drive, adjust the car based on what really works for YOU, and ultimately let YOU drive the car freely and safely
So how are we going to help the community launch the network:
First of all, we have launched the codes, documents about the economic system and governance model and technical features. With all the things available, you are able to understand what the system is about, as a token holder what's your benefit in the system, and being a node in the system plays a big role in the governance
Next, without yet electing the nodes, we will get all token holders to join the current Aelf network through a mapping event. That means as long as you have Aelf tokens, you will be able to get 1:1 test tokens on the public testnet. that gives you full access to all the features, and you will feel like you are already using the mainnet. You will get rewarded in making transactions, voting, etc.
Do try out the Aelf wallet and voting features, you will see how easy to transfer tokens cross-chain. and also how flexible the system allows people to make changes. For example, the community may want to adjust the block rewarding parameters or fees to use certain services on mainnet, they can initiate a discussion and then vote in the system and once voted through, it will be reflected on mainnet.
For people or organizations that want to play a bigger role in the system, we will do a dry run of node election. Take it as the real node election before mainnet launch. We will see who the active members of the community are and being trusted by the community. Among the nodes, we will form a network launch committee. The committee will be the crucial party to oversees and ensures the smooth launch of Aelf mainnet, instead of just relying on the Aelf team. This is our step towards decentralization.
The committee will agree on the actual launch process, final checking all the parameters in the system to be ready for launch and then decide when the criteria are met to launch the network. Once all that is decided. We will invite all interested nodes to apply for the election and let the community know what's their plan to grow the Aelf network. the network will initially be launched with a few nodes from the committee and gradually be replaced by the selected nodes (a bootstrap phase). Along the way, we will work with exchanges to conduct token swap (which we are also designing an innovative system to further enhance security and usability of Aelf tokens in exchanges)
Among this isolated and worrisome time, at least we all have something to look forward to: a successful launch of Aelf network! Once it is launched, we are excited to see a vibrant and technically superior network that is good for Dapps to run on top of it.
https://preview.redd.it/yp28n1jj5er41.png?width=559&format=png&auto=webp&s=c470cdedd7f8923f29a3b1bd777476f22cc76521
Doris Guo Q1: As a Blockchain start-up, what difficulties have you overcome when starting Aelf project? What motivates you to solve difficulties and achieve success today?
Zhuling Chen First, just like launching any start-up, its community and investors are usually regional. There is always some bias on if Asian projects are solid. It is really rare to have an Asian project to be supported by western funds and community from day 1. We were lucky to have overcome that obstacle. Having a global investor line-up from day 1. Having a global team from day 1 and also working with a global community from day 1. This benefited us to have an international perspective which is crucial in the blockchain industry.
Secondly, as a hardcore technology company, it is really hard to put in plain words what is our ambition. Our ambition is huge, achieving key innovations in multiple fronts of blockchain technology and organically combined them to serve real users for the future. Our marketing team has been working really hard to elaborate on what Aelf is. Now we have come to a point that the product is ready. Therefore, it is much easier for all of us to understand how solid Aelf is by trying out the network ourselves! That's exactly what the following events will be about - Try out all the exciting features of Aelf network before mainnet launch.
Doris Guo Q2: What critical problems do you see occurring in the blockchain industry nowadays? How does Aelf solve these problems?
Haobo Ma First, we need to distinguish the difference between BTC and ETH. One is Digital Cash and the other is the Smart Contract Platform. Aelf addresses most of the latter's problems. In short, it can be summarized as performance, end-user friendly, developer-friendly, network economy, and self-governance and upgrading. Each of these areas will probably take up a lot of space, and as a whole are the issues described in our two white papers. In short, Aelf is faster, end-users do not need to know the rules of the blockchain, developers can set up the development environment in 10 minutes, have a good economic model and can carry out proposal governance on the chain.
Doris Guo Q3: What is your long-term vision about the industry which Aelf is working at? Are you afraid someday there will be another project with more innovative technology can replace Aelf?
Haobo Ma Let's talk about where Aelf stands in the traditional Internet. It is essentially a cloud service provider, Aelf provides resources and infrastructure for developers to deploy their services, known as smart contracts. We eventually want Aelf to grow like AAA (Amazon, Azure, AliCloud). Because Aelf is a network that can be dynamically scaled, we can accept any new technology, some of the more advanced technologies we can put on a side chain.
Doris Guo Q4: Why did Aelf choose for cross-chain interaction?
Haobo Ma As I mentioned earlier, Aelf solves the Smart Contract Platform problem. However, there are other digital cash problems as well which we would need to use existing infrastructure such as Bitcoin's chain in order to interact with Bitcoin. There are a lot of infrastructures on Ethereum that we want to interact with. Multi-chain on Aelf network mainly is to isolate resources to improve network performance and network stability.
Doris Guo Q5: What difficulties do the Aelf team have now (I talk about COVID-19)? How does the Aelf team solve it? Have you changed the roadmap?
Haobo Ma There is no great impact. The teams in Singapore and Beijing are communicating with each other remotely on a regular basis. The only change is that most of us are now working from home which has no impact and in fact, it seems conducive to the acceptance of more community developers in the future to come. From the internal working schedule and development timeline, there is no great impact. We do not publish specific timeline as we do not want short term holders (traders) to create too much negative pressure on product development.
Doris Guo Q6: Aelf is an open-source blockchain, and there's the common problem of taking a substantial amount of time for the different participants to agree on strategic decisions. What types of governance models do you use in Aelf to address this issue???
Haobo Ma The issue is about public blockchain network, and who can decide the direction of the network. Our answer is long-term holders. For the short-term holders (traders), we refuse to allow them to participate in any discussion of the direction of Aelf because the short-term holders are likely to make a profit and sell quickly, which is essentially the same example of a person who cheats the President and then runs away for his personal gain. We defined a number of proposal processes, including the logic of the two-party system in the United States, and the participation in the referendum to ensure that the final proposal represents the majority. At the same time, we are looking for some legal solutions to avoid bifurcation, such as prohibiting exchanges from intervening in bifurcated new tokens. While we cannot limit a community, we should be able to find ways to limit a centralized organization. This restriction is akin to a ban on national secession.
Doris Guo Q7: How will Aelf empower Investors, Companies, Developers, Platform Users to deliver impactful solutions and bring value to people all over the world?
Haobo Ma We will learn from the operational experience of successful foundations such as the LINUX foundation and license some commercial companies to use Aelf solutions to solve business problems. At the same time, Aelf is an open-source product under the MIT License, and we accept any use that does not violate this open-source principle.
Zhuling Chen Let me add on to Haobo’s statement: to incentivize and empower the community, we are also exploring ways to let the community decide how to use the funds for Aelf (allocate to where it matters to our community) once mainnet is launched. This means you guys can decide what are the projects to be funded on Aelf, etc
Doris Guo Q8:When will the node campaign start? How will Aelf attract users to participate in nodes election?
Haobo Ma According to our published roadmap, the timeline can be dynamic, but I don't think it will be too long. The main idea is to let everyone understand what we envision Aelf to be like, and what are the rights and benefits of being a node in the future. We hope to find nodes that fully recognize the efforts of Aelf at the present stage and are willing to participate in the future development of Aelf. We will run a simulation of the node campaign on the testnet and set up a temporary mainnet launch committee. Please follow our official Twitter for more upcoming details!
Doris Guo Q9: Token swap form 2 is some kind of cross-chain transfer? It will be handled by a smart contract?
Haobo Ma It is handled by the smart contract, we define an asset cross-chain transfer protocol, but it may be opened after a snapshot.
Doris Guo Q10: Which Exchanges will support token swap? Do you have any plan to list Aelf in some big exchange like Binance, Houbi, Kucoin, .......?
Haobo Ma We are already in talks with some exchanges, there is still competition between exchanges, and many are still hoping to attract more users by getting access to mainnet token swap early.
Doris Guo Q11: Aside conversion of the current tokens to mainnet tokens, what other main features will be accomplished with the mainnet launch?
Haobo Ma We have a documentation file that has been published, which has listed some features: https://Aelf.io/gridcn/Aelf_public_testnet_and_supporting_features_introduction_en_v1.0.pdf
Doris Guo Q12: Do you have any plan to burn or buyback your coin?
Haobo Ma We have plans for the community to govern through DAO, we have no interest in short-term price incentive adjustment as we would prefer to drive the project to higher adoption. After mainnet starts operation, there will be a part of network revenue get destroyed automatically.
Doris Guo Q13: Often, as a newbie developer, I face difficulties on most blockchains. How easy and convenient is it for me on Aelf, and what programming language and tools are needed??
Haobo Ma We set up staging for DAPP developers on GitHub and configured CI. Develop a smart contract using C# with React Native on the front end. So, in fact, developers can fork the source code without setting up the environment locally, and you can conduct unit testing with the help of CI. You can also release the smart contract and generate the installation package of iOS and android online. https://github.com/AElfProject/Aelf-boilerplate
Doris Guo Q14: What is the progress of business development and what are some of your commercial partnerships? How will Aelf rapidly develop the number & performance of DAPP?
Haobo Ma First of all, the blockchain industry is still fairly small and users with ETH and EOS wallets are considered a very small group and its not effective to even promote within these groups. What we need to consider is how to enable users who have never been exposed to blockchain to use DAPP. The competitiveness of Aelf is to make it easier for Aelf developers to promote their DAPP to ordinary users, rather than to teach ordinary users a lot on blockchain knowledge. The average user doesn't like to hear about private keys, mnemonic, Gas Price, RAM, CPU, etc. Only until we solve such problems, companies that need to solve problems through blockchain will be more inclined to use Aelf in technology selection. Therefore, our main work is to explain the competitive advantages of Aelf, ETH and EOS to everyone. We have some business cooperation’s, but we also believe that simply through case-by-case business cooperation will not be able to gain adoption so quickly, therefore we still need to put our products to stay ahead of the next generation.
Doris Guo Q15: What other activities can encourage more people to be confident about Aelf?
Haobo Ma We are only going to state the truth by having those that have faith in us to stay and those that don't to leave. The development of Aelf is not driven by a single foundation, but by a steady stream of contributions from the community. In the future, we will also place the activities in the DAO for on-chain governance, and let the community make decisions by itself.

https://preview.redd.it/e66vhqvl5er41.png?width=555&format=png&auto=webp&s=412a2dd831ba3817806e48855f158482bf671770
Kun Aguero As you know that in the present market situation many new coins or either dying or thriving for liquidity? How will you manage this liquidity problem?
Zhuling Chen Aelf started in 2017. we have gone through a few cycles in the market, still, remember the big down period in 2018-2019. Aelf is financially solid and the team has always been working hard. if you are referring to liquidity in exchanges, we are among the lucky ones that are listed in all major exchanges
Xinshu Dong Hello, great discussions! I would like to ask what are the criteria to join the committee for launching the mainnet? Would love to participate
Zhuling Chen Hi xinshu, great to see you here. The committee will be chosen among the nodes elected during the testnet dry run. Which means, it is really important to participate in the testnet dry run and also start to establish your reputation in the community so that people will elect you as a node. The detailed criteria will include what is your plan to help Aelf to grow, tech competency and reputation.
An Da What are Aelf’s achievements in 2019? Who had supported you to get those things?
Zhuling Chen To name a few, in 2019, Aelf is one of the most active projects on GitHub. This means Aelf is evolving and improving fast in this space and our team has the tech strength. In addition, we have also successfully listed on all major cloud service providers, such as AWS, Azure, Google. So large companies can easily launch Aelf side chains in their organization with minimum hassle.
John How does the voting for master nodes candidates occur? And why is the development of this system important for your project?
Zhuling Chen Voting is going to be pretty simple. All token holders can vote for the nodes they support on our block explorer.
Miha After mainnet lunch, how will you assure that transactional fees will stay low? We know what sometimes happens to fees on ETH blockchain.
Zhuling Chen First of all, due to the fact that is Aelf is scalability, this will reduce transaction fee. Secondly, all transaction fees will be voted by the nodes (which will be elected by you). So they will represent your interest
Bobbyfernandito Currently, as we see All projects are concerned with the speed and security. So, tell us here - what are the facilities Aelf provide to their user and investors?
Haobo Ma Security: we have an automated smart contract code audit. During contract deployment, production nodes and the community audit participation are required. On the other hand, we are also planning to provide a standardized model of centralized exchange access for 100% asset certification and emergency measures to deal with exchange attacks, which we will be released later. Speed: Aelf has been working on improving performance, which is transparent to users which they can also experience by themselves.
An Da What effect does Aelf token have on the Aelf ecosystem? Holding Aelf, what benefits will users receive?
Zhuling Chen Holding ELF enables you to use all the services on the Aelf network. ELF has a deflating system where the total amount will reduce as the network grows. token holders can also vote for the nodes to run the network and also vote for big decisions in the network. part of the fees in the system will also be distributed to token holders via a smart contract
ahihi132 Which companies do you view them as potential partners and that they are somewhat also beneficial for both the user base and Aelf itself?
Zhuling Chen Great question, if I could write a wish list, that will be: let medium-sized financial institutions to use Aelf to challenge the big boys. Let telecommunication companies use Aelf for micro-payment and other innovative business models. We also would like to try out a few public sector projects, which blockchain will is still more transparency and trust
Misun Q1: Which programming languages are you using in your project? And why? Q2-What are another big MILESTONES you have planned for 2020 roadmap and how are they supposed to benefit your costumers? Will it be an exciting year?
Haobo Ma For Q1: We mainly use C# for development, I personally like it. Performance is good, development environment IDEs are strong, and C# creators are influential in the industry. We believe in the right thing, though it may take a while to develop. The smart contract will then add support for multiple languages, such as WebAssembly, depending on the needs of the community. Now it seems that C# is enough.
Hambi crypto Which platforms are your competitors? How will you soar above them, and what better things do you offer than them? So, What’s your outlook on the future of cryptocurrencies in this year and next few years?
Haobo Ma As I have already mentioned this before, Eth and Eos. We provide better performance, cross-chain support (already implemented), end-users do not need to know the details of the blockchain, developer’s payment models and so on.
Floris-Jan What plans is Aelf making to prevent centralized exchange to take over the DPoS algorithm like what happened to Steem? Are we talking about blacklisting exchange wallets, or having the foundation say "No", or putting all trust in the community?
Zhuling Chen Great question, Floris. I’m not going to give away all the details of what Haobo has proposed to work on this, but in a nutshell, in Aelf system, exchange wallets will not be allowed to vote, but only the sub-wallets for each individual can vote. This will also help exchanges to prevent hacking and theft in the future
Alex What your plans in place for global expansion, are Aelf wallet focusing on the only market at this time? Or focus on building and developing or getting customers and users, or partnerships? Can you explain this?
Haobo Ma Our core focus will be through the developers to promote, developers will help Aelf to attract more users. So our product has to be attractive to developers. Just like AWS, they only focus on getting their service right, their developers will think about how to promote it. We don't want to burden them in their promotion process.
Ellkay What do you think are the major threats and barriers that could face the development and adoption of Aelf?
Haobo Ma If I'm a DAPP developer and I need to promote my APP to people who don't recognize blockchain, then I'd like to choose a platform that doesn't have to explain a lot of blockchain details to the end-user, so they can use it easily. We've provided some options in the Boilerplate that allow you to log-in simply via QR code + Password, and our recommended Dapp is an independent wallet and a separate iOS/Android application.
ahihi132 Give me some important reasons why we need to hold Aelf token where in fact hundreds of projects failed and it went to bankruptcy or even developers run when they collect millions/billions of funds?
Haobo Ma First of all, we will not give any suggestions as we only describe the fact that the long-term token holder will be able to govern the Aelf network, get Aelf mining reward and Aelf network profit. At the same time, Aelf network is a deflation model, Aelf network received transaction fees, profit dividends will immediately destroy 10% etc. All investments are risky, and we don't judge the behaviour of other developers. There are so many things in this world that cannot be understood and unfair. It is important to do our job well. I cannot explain these things.
见愁 I remember that boss Ma mentioned to only find those truly innovative applications and enterprises with blockchain, how to find and win partners in these aspects?
Haobo Ma When Linus was developing Linux, I did not think he would find a lot of collaboration when the code was not good. The response we can give is that we already have a lot of interest in cooperation, including what we have announced, what we have not announced, etc.
见愁 How interested are cloud computing providers in participating nodes?
Haobo Ma The vast majority of our nodes should be using cloud services, and as long as a large number of our 17 nodes and other candidate nodes are based on cloud services, our network robustness is determined by these cloud computing providers. Of course, in the expansion, we can also use cloud computing services.
submitted by Floris-Jan to aelfofficial [link] [comments]

Day 4: I will repost this guide daily until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 174K, more exchanges adding SegWit, Core prioritizes SegWit GUI

NOTE Just a daily repost because original OP Bastiat seems to be offline (due to holidays I guess). However, this is quite important as I see much misinformation on which exchanges use segwit or not. Please upvote for awareness.
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
There are 2 different Segwit address formats.
  • p2sh - starting with a "3..."
  • bech32 - starting "bc1..."
Not many wallets/exchanges support bech32 yet and will claim the address is invalid if you try to send to it. bech32 ("native Segwit") is a mildly better solution compared to p2sh.
Exchange Batching Status Segwit (p2sh) Send to bech32
Binance Yes No No
Bitfinex Yes No No
Bitonic ? No No
Bitstamp Yes Yes No
Bittrex Yes ? ?
Coinbase/GDAX No No No
Gemini No No No
HitBTC Yes Yes ?
Huboi ? ? ?
Kraken No Yes ?
LocalBitcoins No ? ?
OKEx ? ? ?
Poloniex ? Yes ?
QuadrigaCX Yes Yes ?
Shapeshift Yes No No
Source 1
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Transaction if the sending address is a SegWit address.
    Source
So what address can I send to safely, there is so much confusion?
  • As of right now...
Non-Segwit Transactions
non-Segwit address to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) No (no support for them yet)
Segwit Transactions
3... address (Segwit) to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) No (no support for them yet)
bc1... address (Segwit) to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) OK
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by psycongoroo to Bitcoin [link] [comments]

Day 5: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. User demand from this community can help lead to some big changes. Have you joined the /r/Bitcoin SegWit effort?

SUMMARY
Segregrated Witness (SegWit) was activated on the Bitcoin network August 24, 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work. If users demand SegWit now it will temporarily releive the transaction backlog while bigger solutions like Lightning are developed.
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ? Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1
Source 2
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Bitonic batching status updated to 'Yes'
submitted by Bastiat to Bitcoin [link] [comments]

r/Bitcoin recap - March 2018

Hi Bitcoiners!
I’m back with the fifteenth monthly Bitcoin news recap.
For those unfamiliar, each day I pick out the most popularelevant/interesting stories in Bitcoin and save them. At the end of the month I release them in one batch, to give you a quick (but not necessarily the best) overview of what happened in bitcoin over the past month.
And a lot has happened. It's easy to forget with so much focus on the price. Take a moment and scroll through the list below. You'll find an incredibly eventful month.
You can see recaps of the previous months on Bitcoinsnippets.com
A recap of Bitcoin in March 2018
submitted by SamWouters to Bitcoin [link] [comments]

Day 9: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. Have you done your part?

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that this is an important data point that indicates if just a few major exchanges would deploy SegWit the high fees bitcoin is experiencing would be eliminated.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 3: I will repost this guide daily until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 274K, more exchanges adding SegWit, Core prioritizes SegWit GUI

BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance ? NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ?
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Ready Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1(https://web.archive.org/web/20171212214514/https://bitcoincore.org/en/SegWit_adoption/)
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Updated Segwit Exchange Status for Binance and HitBTC
submitted by Bastiat to Bitcoin [link] [comments]

Day 8: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. BTC Core SegWit GUI coming May 1, Coinbase incompetence exposed, more exchanges deploy SegWit

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that the high fees bitcoin is experiencing could be easily addressed and need not exist.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 7: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Do you want low tx fees, because this is how you get low tx fees

TL/DR
Bitcoin users can help lower transaction fees and improve bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 6: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol

TL/DR
Bitcoin users can help lower transaction fees and contribute to bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
  • Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

2020: EXACTLY How to buy Bitcoin or ANY CRYPTOCURRENCY in ... INSTALL Binance APP on your iPhone Under 3 mins Transfer Crypto Assets From Binance to Ledger - YouTube HOW TO GET FREE BITCOIN on Binance - NO CATCH, NO INVESTMENT NECESSARY How To Get Any Binance Coin Wallet Address To Send Funds ... Use a Debit Card on Binance US to Buy Bitcoin! - YouTube How to deposit and withdraw on Binance - YouTube

The Bitcoin Core daemon (bitcoind) is not included in the .dmg file you may have downloaded to install Bitcoin-QT. Bitcoind, along with its support binaries, is instead included in the OS X .tar.gz file listed on the official Bitcoin Core download page. To download this file using Terminal, execute the following command: Outside of its core exchange platform, Binance has its fingers in a number of other pies. For example, it was announced last year that the company was looking to launch the world’s first ever blockchain bank in Malta. The platform also signed a Memorandum of Understanding with the Malta Stock Exchange with the view of facilitating the trading of digital securities. Binance is also renowned ... Trade over 40 cryptocurrencies and enjoy the lowest trading fees in America. Receiving Bitcoin. Open your Bitcoin.com wallet app and select Receive. Choose which wallet you want to receive Bitcoin to. Make sure you select a BCH wallet if you are receiving Bitcoin Cash or a BTC wallet if you are receiving Bitcoin. Your chosen wallet will generate an address that lets you receive coins. Copy this by tapping the QR code if ... Overview Name Bitcoin Core Wallet Released 2009 Wallet type Web-based, Hot wallet Platforms supported macOS, Windows, Linux, Ubuntu, and ARM Linux Price Free Cryptocurrencies supported BitCoin(BTC) Mobile support No The need to use an official wallet that comes right from the Bitcoin network itself is especially notable for new cryptocurrency users. But how about core qt wallet client. Well, you can install wallet in your new machine and just transfer coins to it. Or you can just copy the wallet backup files and put it in the appropriate folder. But this is not the right solution. Bitcoin blockchain file size is more than 150 GB, Monero wallet size is more than 50 GB and Litecoin wallet is more than 20 GB. With such huge blockchain file ... Bitcoin Core is a community-driven free software project, released under the MIT license. Verify release signatures Download torrent Source code Show version history. Bitcoin Core Release Signing Keys v0.8.6 - 0.9.2.1 v0.9.3 - 0.10.2 v0.11.0+ Or choose your operating system. Windows exe - zip. Mac OS X dmg - tar.gz. Linux (tgz) 64 bit. ARM Linux 64 bit - 32 bit. Linux (Snap Store) Support ... Feel free to stop at Level 0 or Level 1, which is fine. More advanced configs are offered to those with more tech savvy. BTW, the "For Dummies" is a callback to a set of "tech" books in the 90's intended to be as easy as possible. It is in jest and not intended to insult the reader. Finally,... For example, you can download and install the Bitcon.com wallet app free of charge and manage your bitcoin cash and bitcoin core holdings in one wallet. Almost 5 million Bitcoin.com wallets have ... Installer Bitcoin Core. Exécuter le fichier d'installation de Bitcoin Core (clic-droit et "Exécuter en tant qu'administrateur") et lancer l'installation avec les paramètres par défaut. Lancez Bitcoin Core et choisissez un dossier dans lequel seront stockées les données de Bitcoin (data-dir), par exemple “D:\bitcoin_mainnet”. Bitcoin Core va démarrer après quelques instants et ...

[index] [23220] [3828] [4930] [9618] [6757] [8128] [4225] [17646] [11459] [1078]

2020: EXACTLY How to buy Bitcoin or ANY CRYPTOCURRENCY in ...

!!👨‍💻 SET UP A BINANCE US ACCOUNT 👩‍💻 !! https://www.binance.us/?ref=35000644 Binance US now allows you to use a Debit card to make purchases ... Today, we take a closer look at how you can move your crypto assets from your Binance account to your Ledger Live account. Read more about it in this article... Bitcoin is a volatile instrument and can move quickly in any direction. Crypto Oracle is not responsible for any trading loss incurred by following this advice Category Brief intro on how to get any coin wallet address to deposit funds to. In this example I'm using Binance Exchange and wallet address ETH- Ethereum In order t... Shakepay Link: https://shakepay.me/r/Z3AUZHI Note the Shakepay funding address has changed! It's now [email protected] Binance Link: https://www.binance.co... Download Binance APP Link: https://goo.gl/1ahLJ5 Previous Video: How to Install Iota Wallet on Mac https://www.youtube.com/edit?o=U&video_id=HALnIJUvoHY ----... IN today's video we take a look at how to Use Binance , specifically, how to deposit and withdraw on the Binance Exchange. I've set up a new Telegram group f...

#